Home >>  Computer Science  >>  IR Based video streaming on mobile phones

This Project is all about to provide easily affordable security system for a office or house or bank or any important room where you want to have security by connecting IR Transmitter and Receiver at the entrance of the room. If anytime, the Ir Rays are cut, The PC is intimated abut the same. Immediately, an SMS is sent to the owner of the setup regarding the intrusion such that the owner can open the application in his cell and view the live video of the happenings. Also, an alarm is activated at the PC?s end to alert the people around regarding intrusion. This project is intended to : View live video recording through a mobile. This application allows the mobile user to track the activities happening at a particular location. Take the snapshots of the video recorded through webcam in a mobile. Store these snapshots as images in the mobile. Images can be stored in different formats subjected to the a particular selected format. To display the time with the image when it was captured. in the GPRS enabled Mobiles. Language used: Core Java J2ME J2EE(jmf, servlets) Java Mail API Requirements: Software Requirements J2SDk1.4 or better. J2ME WTK2.1 or higher JMF2.1.1e or higher Jakarta Tomcat Server 5.0 or better. Hardware Requirements Pentium P3(2.66GHz) Processor or higher. Minimum 256 MB RAM. WebCam. Other Requirements GPRS enabled Mobile with a minimum of 20KB of free memory to upload the application. PC connected to internet using direct connection. Description: ?GPRS Video Streaming? is an Internet browser application developed with the main intention to view the live events taking place at a site wherever the webcam will be focusing, through a GPRS enabled Mobile. It gives user the high quality images with much less (General Packet Radio Service)GPRS or Universal Mobile Telecommunication System(UMTS) traffic, so the communication with the web will not be a cost problem at today?s GPRS or UMTS rates. As security is a critical factor for the business and at many places , so everyone who utilizes this application can get to know that the events happening at a particular location with just a mobile from a remote location. This package uses a user friendly GUI so that the people can use it with utmost ease. In this project, Ir Tx passes rays continuously to receiver, will in turn is connected at the top of the entrance of the door and will be connected to the PC which has webcam and internet connection. If there is no interruption between the transmitter and receiver, the receiver will receive rays continuously, and this will be monitor by the PC continuously. If any obstruction occurs there, the passage of rays will be disconnecting, and that will be detected by the hardware connected to the PC. If there is any obstruction, the webcam will start recording the video and simultaneously the sms will be send to corresponding person and the keyboard, mouse of the PC will be disabled. To view the live events happening at a site we need to connect to the PC with which the webcam is connected and the server part of this application should be running there in. Next we can start the client part loaded in the mobile and we need to specify the PC to be connected by passing its IP address where in the server part should be running. As well as we can specify the format for the images/snapshots to be taken and the corresponding time will be stored with that picture. We can choose view webcam option to see the live video. So we can connect to any location or the PC through this application which must fulfill the requirements specified above. Modular Description : 1. Client This module has been implemented in Core Java and J2ME. It is used to : To view video captured by the webcam. This client part of the application allows the mobile user to see live video from a Remote Location. Take the snapshots of the video recorded through webcam by connecting to the server through GCF connection established in j2me application and Servlets which is running in web server. The server modules retrieve the images from the webcam and sends to the client for display. 2. Server The Server module connects the web cam through the JMF(java media framework ) which in turn connects the web cam for getting the images the images will be displayed for each and every specified delay seconds

  

hi sir please can u send me synopsis im urgent need of it..thank u..please send it soon

  

sir i want this project source code and document plz send as soon as possible i am positive response from u....tparameshwar@gmail.com

  

Hello Ma'am,

We're working on the same project for our final year submission at Cusat, cochin and almost nearing completion. Although, some areas remain to be fine-tuned for instance-the Media player working on the cell phone and the sendSMS module..

Can you please send me the project report/ source code.. at the earliest actually... v.yatri@gmail.com is my email

 

Would highly appreciate any help..

Thanks. 

  

PLease send me this project...m working on WM encoder...i need it...

deepakgarg011@gmail.com

  

hi.

i m very much impressed by ur idea.i want to know all the prerequistics relating to d project.please tell me abt tht..

thx in advanced.

u can contact me at abhi_agg14@yahoo.co.in